BIS Certification for Drums as per IS 13997, IS 1783 (PART 1 AND 2), IS 2552, IS 3575, IS 916 AND IS 10325

In the realm of industrial manufacturing and packaging, quality assurance is of paramount importance. Ensuring that products meet the highest standards of safety and quality is not just a matter of compliance but also a marker of credibility and trust in the market. One way to achieve this is through the Bureau of Indian Standards (BIS) certification, which serves as a testament to a product’s adherence to specific guidelines and standards set by the Indian government. In this article, we delve into the BIS certification requirements for various types of industrial drums and how Omega QMS Pvt Ltd can assist in obtaining this valuable certification.

INDIAN STANDARDS

1. IS 13997:2014 DRUMS, LARGE OPEN TOP

This standard covers the requirements for steel open top drums of 200 litre [180 kg] nominal capacity with bottom end fixed in the following types of construction: a) Grade A — Drums of steel sheets of nominal thickness 1.25 mm for body and end, with bottom seam of either double seam construction or spiral/triple seam construction and top full size openable drum lid. b) Grade B — Drums of steel sheets of nominal thickness 1.00 mm for body and end, with bottom end seam of spiral/triple seam construction and top full size openable lid. The minimum gross capacity of the drums measured with water at ambient temperature shall be 210 litre with lid fitted on the drums. The body and ends of both Grade A and Grade B drums shall be made from cold reduced carbon steel sheets conforming to Grade CR1, CR2 or CR3 of IS 513. The side and the bottom joints shall be water-tight.

2. IS 1783 (PART 1): 2014 DRUMS LARGE, FIXED ENDS – GRADE A

This standard (Part 1) covers the requirements for Grade A steel drums of 200 litre nominal capacity with fixed ends with the following type of construction: a) Type 1 — Drums of steel sheets of nominal thickness 1.25 mm for body and ends with end seam resistance welded and double seam construction. b) Type 2 — Drums of sheets of nominal thickness 1.25 mm for body and ends, with end seam of triple/spiral seam construction. The body and ends of the drums shall be made from cold reduced carbon steel sheets conforming to Grade CR1, CR2 or CR3 of IS 513. Apart from dimensions, leakage test, drop test and hydraulic pressure tests are prescribed.

3. IS 1783 (PART 2) :2014 DRUMS LARGE, FIXED ENDS — SPECIFICATION: PART 2 GRADE B DRUMS

This standard covers the requirements for Grade B mild steel drums of 200 litre — nominal capacity with fixed ends with the following types of construction: Type 1 — Drums of sheet thickness 1.25 mm for body and ends, with end seam of double seam construction; and Type 2 — Drums of sheet thickness 1.00 mm for body and ends, with end seam of spiral seam/triple seam construction. The minimum gross capacity of the drums measured with water at ambient temperature shall be 210 litres. Body and ends of the drum shall be made from mild steel sheet conforming to Grade CR1, CR2 or CR3 of IS 513. Apart from dimensions, leakage test, drop test and hydraulic pressure tests are prescribed.

4. IS 2552:1989 STEEL DRUMS (GALVANIZED AND UNGALVANIZED)

This standard prescribes the requirements of mild steel ( galvanized and ungalvanised)  drums with fixed ends of nominal capacity ranging from 3 to 150 litres. The drum shall be designated by nominal capacity and grade A1, A2, B1, B2 and C depending upon steel sheet thickness. Apart from dimensions, leakage test, drop test and hydraulic pressure tests are prescribed.

5. IS 3575:1993 BITUMEN DRUMS — SPECIFICATION

This standard covers requirements for steel drums with fixed ends of nominal capacities 160 litres and 200 litres used for packing of bitumen having penetration value of 225 and below. The body shall be strengthened by 12 corrugations which shall be symmetrical to central line. Apart from dimensions, air pressure tests has been prescribed.

6. IS 916:2000 SQUARE TINS FOR SOLID PRODUCTS

This standard prescribes the requirements of square tins of 18-litre nominal capacity used for packing of solid products. Body may be a two-piece construction, soldered at the diagonally opposite seams or a single-piece welded seam construction. The welded seam shall be covered with a suitable lacquer on the inside and outside. Apart from dimensions and tolerances, handle pull  test  and air pressure tests are prescribed in the standard.

7. IS 10325 :2000 SQUARE TINS – 15 KILOGRAMS OR LITRE FOR GHEE, VANASPATI, EDIBLE OILS AND BAKERY

This standard specifies the requirements for 15 kg/ litre square tins used for packing of ghee, vanaspati, edible oils and bakery shortenings (or nitrogen dispersed edible oils). Standard grade single cold-reduced electrolytic tinplate of nominal thickness 0.28 mm conforming to IS 1993 or standard grade double cold-reduced electrolytic tinplate of nominal thickness 0.21 mm conforming to IS 13954 shall be used for the body ends and capseals on lids of tins. Apart from dimensions and tolerances, finish, air pressure test, handle pull test and hydraulic pressure test have been prescribed in the standard.

QUALITY CONTROL ORDER (TECHNICAL REGULATION) ISSUED BY THE DEPARTMENT FOR PROMOTION OF INDUSTRY AND INTERNAL TRADE, MINISTRY OF COMMERCE AND INDUSTRY, GOVT. OF INDIA ON 17 OCTOBER 2023 FOR MANDATORY BIS CERTIFICATION

The DPIIT, Ministry of Commerce & Industry, Govt. of India, has issued an order, making it mandatory for all drums and canisters  to be used in India, whether manufactured in India or imported from foreign countries, shall mandatorily carry the Standard Mark of the Bureau of Indian Standards under a valid BIS licence.  In short, it has become obligatory for all the manufacturers of draums and canisters, whether in India or overseas, to immediately apply for BIS licence and obtain a valid BIS certification licence before that the last date of implementation of the order, i.e., 16 April  2024.

BIS CERTIFICATION SCHEME

The BIS Standards, listed above establish a comprehensive framework encompassing various quality parameters that drums and canisters must adhere to. The Bureau of Indian Standards Certification Scheme is a vital framework established by the Indian government to ensure the quality, safety, and reliability of products available in the market. This scheme aims to safeguard consumer interests by setting stringent benchmarks and guidelines that products must meet before they can be deemed compliant. BIS certification covers a wide range of industries and products, encompassing the entire gamut of industrial and manufacturing activity.  Various steps involved in the BIS Certification process are enumerated below:

• Standard Identification: Manufacturers identify the relevant BIS standard that applies to their chosen product category. These standards outline the specific quality, safety, and performance requirements that the product must meet.
• Application Submission: Manufacturers submit an application for BIS certification to the Bureau of Indian Standards (BIS), providing details about the product, its specifications, and the desired certification mark.
• Factory Inspection: BIS conducts an inspection of the manufacturer’s production facility to assess the quality control processes, infrastructure, and adherence to relevant standards.
• Sample Testing: BIS collects samples of the product from the manufacturer for testing in authorized BIS laboratories or recognized testing centers. These tests evaluate various parameters specified by the BIS standard.
• Certification Decision: Based on the satisfactory test results and compliance with standards, BIS decides whether to grant certification to the product. If approved, the manufacturer is issued a BIS certification license.
• Regular Monitoring: BIS monitors the manufacturing process of certified products through periodic audits and market surveillance to ensure ongoing compliance with quality control processes and standards.

OMEGA QMS PVT. LTD. – PARTNERING FOR SUCCESS

In the pursuit of achieving BIS certification and maintaining the highest levels of product quality, Omega QMS Pvt. Ltd. emerges as an invaluable partner for manufacturers. Backed by a global presence and a stellar track record of successful collaborations with Fortune 500 companies, Omega QMS provides an extensive array of services designed to streamline the certification process and ensure compliance with industry standards.

• Expert Guidance: Omega brings together a team of seasoned experts who possess in-depth knowledge of regulatory requirements, industry best practices, and intricacies of certification process. These experts guide manufacturers through the complex landscape, offering insights and strategies to navigate the process efficiently.
• Testing and Validation: Omega assists manufacturers in planning and executing necessary tests and validations required for BIS certification.
• Documentation and Compliance: The journey toward BIS certification demands meticulous documentation of processes, materials, and testing procedures. Omega aids manufacturers in creating comprehensive and accurate documentation that aligns with BIS requirements, reducing the risk of errors and rejections.
• Audit Support: Omega prepares manufacturers for BIS audits, which are a crucial part of the certification process. With its expertise, the organization ensures that manufacturers are well-prepared for audits, addressing any issues that may arise and increasing the likelihood of a successful outcome.
• Customized Approach: Each manufacturer’s journey toward BIS certification is unique. Omega understands this and tailors its services to fit the specific needs, challenges, and goals of individual manufacturers, ensuring a personalized and effective approach.
• Global Experience: With presence in over 40 countries, Omega brings global experience to the table. This international exposure allows the organization to offer insights into varying regulatory environments and industry practices, enabling manufacturers to excel globally.

Omega QMS Pvt. Ltd. functions as a strategic partner for manufacturers aiming to achieve BIS Certification. Its multifaceted approach encompasses expert guidance, process control, testing and validation support, documentation assistance, audit preparation, training, and a global perspective. By collaborating with Omega, manufacturers gain a competitive edge in their pursuit of certification while upholding the highest standards of product quality and consumer satisfaction.

For more details you can reach out to Omega at info@globalomega.com.

Omega QMS Pvt Ltd offers cost-effective solutions tailored to your specific needs, ensuring that you get the best value for your investment in BIS certification.

BIS certification is a vital step for manufacturers of industrial drums and other products to establish trust, ensure safety, and comply with regulatory requirements. The certification process can be complex, but with the assistance of experts like Omega QMS Pvt Ltd, manufacturers can navigate it with ease. By obtaining BIS certification through their guidance, manufacturers can demonstrate their commitment to delivering high-quality and safe products to the market, setting them apart in the competitive industrial landscape.