BIS Certification for Multipurpose Dry Batteries: A Comprehensive Guide by Omega QMS Pvt Ltd

Introduction In today’s consumer electronics landscape, dry cell batteries power an enormous range of devices, from remote controls to flashlights. As these products enter Indian markets, it is mandatory that they conform to the safety and performance benchmarks laid out by the Bureau of Indian Standards (BIS). At Omega QMS Pvt Ltd, we provide end-to-end support in securing BIS certification for multipurpose dry batteries, ensuring compliance, market access, and consumer trust.

Legal Framework: Understanding the BIS Mandate

The certification requirement for multipurpose dry batteries is mandated under S.O. 516(E), issued on May 26, 1987, under the Bureau of Indian Standards Act, 1986. According to this order:

• No person or organization can manufacture, store, sell, or distribute multipurpose dry batteries unless they conform to the Indian Standard IS 8144.
• All compliant products must bear the Standard Mark (ISI mark)issued by BIS.
• Exported batteries are exempted only if they meet foreign specifications which are not lower than IS 8144.
• Non-conforming or defective batteries and raw materials must be rendered unusable and discarded as scrap.

Technical Standard: IS 8144:2018

This Indian Standard, titled “Multipurpose Dry Batteries — Specification”, is the second revision and supersedes IS 8144:1997. It harmonizes Indian regulations with IEC 60086, consolidating requirements previously distributed across multiple standards.

Battery Types Covered

• R03 (AAA)
• R6 (AA)
• R14 (C)
• R20 (D) 

Key Requirements Under IS 8144:2018

1. Dimensions and Tolerances
   • Each battery type must conform to strict maximum size and tolerance limits.
2. Terminals
   • Must ensure stable and secure electrical contact under normal use.
3. Marking
   • Must comply with IS 6303:2018 guidelines including battery type, voltage, and ISI mark.
4. Performance Requirements
   • Initial Life Test
   • Delayed Life Test (after 12 months of storage)
   • Leakage Test
   • Delayed Life Test under Dry Heat
5. Voltage & Discharge Conditions
   • Minimum life spans under various resistive loads (from flashlights to remote controls) are detailed in performance tables specific to each battery type.
6. Nominal Voltage
   • 5 V for all specified battery types.

The BIS Certification Process: Step-by-Step with Omega QMS Pvt Ltd

1. Documentation Preparation
   • Collect and prepare all required documents including manufacturing licenses, quality manuals, and test reports.
2. Application Submission
   • File the application under the BIS Product Certification Scheme.
3. Factory Audit by BIS Officials
   • Inspection of production processes, testing facilities, and quality controls.
4. Product Sample Testing
   • BIS-approved laboratories conduct type testing as per IS 8144:2018 standards.
5. Grant of License
   • After successful audit and test results, BIS issues the certification allowing the use of the ISI mark.
6. Post-Certification Surveillance
   • Periodic inspections and sample testing ensure continued compliance.

Why Partner with Omega QMS Pvt Ltd?

• Expertise: Deep knowledge of BIS standards including IS 8144 and IS 6303.
• Efficiency: We streamline the documentation and compliance process, minimizing delays.
• Support: From factory audit preparation to resolving queries during testing, we provide hands-on assistance.
• Credibility: Help your brand earn consumer trust through certified quality and safety.

Conclusion

Achieving BIS certification for multipurpose dry batteries is not just a legal requirement, but a step towards quality assurance and consumer safety. With Omega QMS Pvt Ltd as your trusted partner, you can confidently navigate the complexities of certification and place your product in the hands of satisfied customers across India.

For a consultation or to begin your certification journey, contact us today.

House, Rajendra Place, New Delhi-110008,

India, Phone: 011-41413939(100 lines), Email: info@globalomega.com,

sales@globalomega.com, mktg@globalomega.com