BIS Certification for Electrical Accessories as per IS 14772:2020 , IS 14927 (PART 2):2023, IS 1258:2005, IS 15787:2008, IS 13774:2021, IS 15652:2006, IS 7809 PART 3/SEC 1: 1986 AND IS 16012:2012

In a world that relies heavily on electricity for its day-to-day functioning, ensuring the safety and reliability of electrical products is of paramount importance. The Bureau of Indian Standards (BIS) plays a vital role in this regard by setting stringent standards for various electrical products. In this article, we will explore the BIS certification process for a range of electrical accessories and products, such as Boxes and Enclosures, Cable Trunking and Ducting Systems, Bayonet Lamp Holders, Switch-socket-outlets, Live Working Gloves, Insulating Mats, Insulating Tapes, and Poly-Laminated Aluminum Cable Wrap. Additionally, we will delve into the role of Omega QMS Pvt Ltd in helping businesses obtain BIS Certification, ensuring that their products meet the requisite safety and quality standards.

INDIAN STANDARDS

IS 14772:2020 BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES

This standard applies to boxes, enclosures and parts of enclosures (hereafter called “boxes” and “enclosures”) for electrical accessories with a rated voltage not exceeding 440 V a.c. intended for household or similar fixed electrical installations, either indoors or outdoors. This standard does not apply to:a) Ceiling roses; b) Luminaries supporting couplers; and c) Boxes, enclosures and parts of enclosures specifically designed to be used for cable trunking and ducting systems complying with IEC 61084, and which are not intended to be installed outside of these systems. The preferred values of the rated voltage of the integrated or incorporated connecting devices are 250 V and 400 V a.c. The standard rated connecting capacities are 0.5 mm², 0.75 mm², 1 mm², 1.5 mm²,2.5 mm², 4 mm², 6 mm², 10 mm², 16 mm²,25 mm², 35 mm².

IS 14927 (PART 2):2023 CABLE TRUNKING AND DUCTING SYSTEMS

This standard specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1000 V AC and 1500 V DC. These systems are intended for mounting on walls and/or ceilings. They can be embedded, installed in a flush or semi-flush state, surface mounted or mounted away from the surface using fixing devices. This document does not apply to conduit systems, cable tray systems, cable ladder systems, power track systems or equipment covered by other standards.

IS 1258:2005  BAYONET LAMP HOLDERS

This standard applies to bayonet lamp holders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage not exceeding 250 V. As far as it reasonably applies, the standard also covers lamp holders, which are wholly or partly integral with a luminaire or intended to be built into appliances. For all lamp holders rated voltage not exceeding 250 V is allowed. Lamp holders B15d are not intended for use in circuits with igniters. Lamp holders B22d shall not be used in circuits with igniters without approval from the lamp holder manufacturer. 2 Standard rated currents are: — 2A for lamp holders B15, — 2A for lamp holders B22. The rated current shall be not less than the standard value, rated currents higher than 2 A are allowed. Lamp holders are classified:  According to the material of the exterior, According to degree of protection against solid objects and ingress of water, According to method of fixing, According to type, According to protection against electric shock, According to resistance to heat etc.

IS 15787:2008 SWITCH-SOCKET-OUTLETS (NON-INTERLOCK TYPE )

This standard applies to fixed switched socket-outlets with out interlock for ac only, with or without earthing contact , with rated voltage not exceeding 440V and a rated current not exceeding 32A, intended for household and similar purposes, either indoors or outdoors. Switched socket-outlets are classified : a) According to the method of actuating the switch : 1) Rotary switches 2) Tumbler switches; 3) Rocker switches; and 4) Push-button switches b) According to the switching of the neutral: 1) Switched neutral ; and 2) Unsw itched neutral.

IS 13774:2021  LIVE WORKING- GLOVES OF INSULATING MATERIAL

This International Standard is applicable to electrical insulating gloves and mitts that provide protection of the worker against electric shock. Unless otherwise stated, the use of the term “glove” includes both gloves and mitts. This standard also covers electrical insulating gloves with additional integrated mechanical protection referred to in this document as “composite gloves”. The gloves covered by this standard shall be designated as follows: – by class, as class 00, class 0, class 1, class 2, class 3 and class 4; – by special properties, by the addition of a suffix to the class of the glove. All gloves may be lined or unlined. They may have an exterior covering and may be specially compounded to reduce the effects of chemical attack. If gloves have an exterior covering, it shall be of a contrasting colour to assist in visual inspection. Gloves are made of elastomer. Gloves may be manufactured with or without cuff roll. Gloves shall withstand the mechanical, climatic and environmental stresses specified in this standard. Gloves shall be capable of withstanding the corresponding electrical stresses according to its electrical class.

IS 15652:2006 INSULATING MATS FOR ELECTRICAL PURPOSES

The standard is applicable to insulating mats made of Elastomer (a generic term that includes rubbers, latex and elastomeric compounds that may be natural or synthetic or a mixture or a combination of both) for use as floor covering for the protection of workers on ac and dc installations with the system voltages up to 66 kV ac and 240 V dc.  It prescribes the requirements for the performance of the product, method of samplings, testing and acceptance. Four classes of mats, covered under this standard and differing in electrical characteristics for different use voltages. Mats of all classes shall be resistant to acid and oil and low temperature and shall be identified by the respective class symbol. Dimensions, tensile strength and dielectric properties are specified for electrical mats.

IS 7809 PART 3/SEC 1: 1986 ADHESIVE INSULATING TAPES FOR ELECTRICAL PURPOSESS

This standard covers requirements of pressure sensitive tape made of plasticized PVC with a non-thermosetting adhesive. The tapes have been classified in two types. 1. General Purpose Type: This type is suitable for application at temperature above 0 degree centigrade and designated as F-PVC/90/0/Tp. 2. Low Temperature Application Type: This type is suitable for application at temperature not less than minus 18 degree centigrade and designated as F-PVC/75/18/T.  Requirements of Tensile strength, Adhesion to steel, Adhesion to backing, Electrical strength at Room temperature, Electric strength after humid conditioning, Flammability, Electrolytic corrosion and Stability to accelerated aging are  specified in the standard.

IS 16012:2012  POLY-LAMINATED ALUMINUM CABLE WRAP

This standard covers the requirements of polylaminated aluminium cable wrap.The material used for aluminium and aluminium alloy foil shall conform to the chemical composition of the Grades 19000 or 40800 of  IS 737. The material shall be supplied in fully annealed ‘O’ temper. If agreed by the purchaser, the material may be supplied in any other tempers. Polyethylene for this purpose of this standard includes low density polyethylene (LDPE) and linear low density polyethylene (LLDPE). Copolymer for the purposes of this standard is ethylene acrylic acid resin. Plastic material may be laminated to the base metal by any method that shall produce a laminate that shall conform to this standard. Dimensions and peel strength are some of the requirements specified in the standard.

QUALITY CONTROL ORDER (TECHNICAL REGULATION) ISSUED BY THE DEPARTMENT FOR PROMOTION OF INDUSTRY AND INTERNAL TRADE, MINISTRY OF COMMERCE AND INDUSTRY, GOVT. OF INDIA ON 01 JANUARY 2024 FOR MANDATORY BIS CERTIFICATION

The DPIIT, Ministry of Commerce & Industry, Govt. of India, has issued an order, making it mandatory for all electrical accessories to be used in India, whether manufactured in India or imported from foreign countries, shall mandatorily carry the Standard Mark of the Bureau of Indian Standards under a valid BIS licence.  In short, it has become obligatory for all the manufacturers of electrical accessories, whether in India or overseas, to immediately apply for BIS licence and obtain a valid BIS certification licence before that the last date of implementation of the order, i.e., 30 June 2024.

BIS CERTIFICATION SCHEME

The BIS Standards listed above  establish a comprehensive framework encompassing various quality parameters that electrical accessories must adhere to. The Bureau of Indian Standards Certification Scheme is a vital framework established by the Indian government to ensure the quality, safety, and reliability of products available in the market. This scheme aims to safeguard consumer interests by setting stringent benchmarks and guidelines that products must meet before they can be deemed compliant. BIS certification covers a wide range of industries and products, encompassing the entire gamut of industrial and manufacturing activity.  Various steps involved in the BIS Certification process are enumerated below:

• Standard Identification: Manufacturers identify the relevant BIS standard that applies to their chosen product category. These standards outline the specific quality, safety, and performance requirements that the product must meet.
• Application Submission: Manufacturers submit an application for BIS certification to the Bureau of Indian Standards (BIS), providing details about the product, its specifications, and the desired certification mark.
• Factory Inspection: BIS conducts an inspection of the manufacturer’s production facility to assess the quality control processes, infrastructure, and adherence to relevant standards.
• Sample Testing: BIS collects samples of the product from the manufacturer for testing in authorized BIS laboratories or recognized testing centers. These tests evaluate various parameters specified by the BIS standard.
• Certification Decision: Based on the satisfactory test results and compliance with standards, BIS decides whether to grant certification to the product. If approved, the manufacturer is issued a BIS certification license.
• Regular Monitoring: BIS monitors the manufacturing process of certified products through periodic audits and market surveillance to ensure ongoing compliance with quality control processes and standards.

OMEGA QMS PVT. LTD. – PARTNERING FOR SUCCESS

In the pursuit of achieving BIS certification and maintaining the highest levels of product quality, Omega QMS Pvt. Ltd. emerges as an invaluable partner for manufacturers. Backed by a global presence and a stellar track record of successful collaborations with Fortune 500 companies, Omega QMS provides an extensive array of services designed to streamline the certification process and ensure compliance with industry standards.

• Expert Guidance: Omega brings together a team of seasoned experts who possess in-depth knowledge of regulatory requirements, industry best practices, and intricacies of certification process. These experts guide manufacturers through the complex landscape, offering insights and strategies to navigate the process efficiently.
• Testing and Validation: Omega assists manufacturers in planning and executing necessary tests and validations required for BIS certification.
• Documentation and Compliance: The journey toward BIS certification demands meticulous documentation of processes, materials, and testing procedures. Omega aids manufacturers in creating comprehensive and accurate documentation that aligns with BIS requirements, reducing the risk of errors and rejections.
• Audit Support: Omega prepares manufacturers for BIS audits, which are a crucial part of the certification process. With its expertise, the organization ensures that manufacturers are well-prepared for audits, addressing any issues that may arise and increasing the likelihood of a successful outcome.
• Customized Approach: Each manufacturer’s journey toward BIS certification is unique. Omega understands this and tailors its services to fit the specific needs, challenges, and goals of individual manufacturers, ensuring a personalized and effective approach.
• Global Experience: With presence in over 40 countries, Omega brings global experience to the table. This international exposure allows the organization to offer insights into varying regulatory environments and industry practices, enabling manufacturers to excel globally.

Omega QMS Pvt. Ltd. functions as a strategic partner for manufacturers aiming to achieve BIS Certification. Its multifaceted approach encompasses expert guidance, process control, testing and validation support, documentation assistance, audit preparation, training, and a global perspective. By collaborating with Omega, manufacturers gain a competitive edge in their pursuit of certification while upholding the highest standards of product quality and consumer satisfaction.

For more details you can reach out to Omega at info@globalomega.com.

In a world where electrical safety is paramount, BIS certification serves as a crucial quality assurance mechanism. Whether it’s Boxes and Enclosures, Cable Trunking and Ducting Systems, Bayonet Lamp Holders, Switch-socket-outlets, Live Working Gloves, Insulating Mats, Insulating Tapes, or Poly-Laminated Aluminum Cable Wrap, BIS certification ensures that electrical products meet the highest safety and quality standards.

Omega QMS Pvt Ltd plays a pivotal role in assisting businesses in obtaining BIS certification, ensuring that their electrical products are compliant with the relevant standards. By partnering with Omega QMS Pvt Ltd, businesses can navigate the certification process smoothly and efficiently, providing peace of mind to both manufacturers and consumers. Ultimately, BIS certification is not just a mark of quality; it’s a commitment to electrical safety.