Published: 29 May 2026
BIS Certification for Electric Sieving Machines under QCO 2026
Electric sieving machines — used for sifting flour, powdered spices, and other dry ingredients in household and commercial baking and food preparation — are covered under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 — commonly referred to as QCO 2026. BIS certification is mandatory for all electric sieving machines before they can be sold or imported in India.
Scope
Covered Products
Electric Sieving Machines Electric Food Processors (related kitchen appliance category)
Standard
Applicable Indian Standard
IS 302 (Part 1): 2024 — Household and Similar Electrical Appliances — Safety: Part 1 General Requirements (technically equivalent to IEC 60335-1: 2020).
Compliance Requirements
Key Requirements Under Scheme-I
BIS licence under Scheme-I mandatory before any sale or import Product testing at a BIS-recognised laboratory against IS 302 (Part 1): 2024 Factory inspection and audit by BIS ISI marking required on every certified unit Ongoing surveillance audits to maintain licence validity
Critical Note
Fine Dust and Motor Insulation
Electric sieving machines generate fine airborne dust from flour and powdered ingredients during operation. Over time, fine dust accumulation on motor windings and electrical components can degrade insulation resistance. BIS testing evaluates motor insulation resistance after simulated dust accumulation and the effectiveness of motor housing sealing against fine particle ingress. Products with open motor housings that allow dust to settle on electrical components are likely to show insulation degradation in long-term testing. Importers should verify motor protection design for fine-dust environments before formal BIS submission.
Market Context
Why This Category Matters
Electric sieving machines are used in bakeries, home kitchens, and commercial food production across India. They are imported and distributed through kitchenware and bakery equipment channels. Non-compliance after October 2026 results in import rejection and penalties under the BIS Act, 2016.
Implementation Timeline
Compliance Dates
1st October 2026 General (other than micro and small) 1st January 2027 Small Enterprises 1st April 2027 Micro Enterprises
Exemptions
Key Exemptions
Exemption 01
Export manufacturing
Goods manufactured domestically solely for export are exempt.
Exemption 02
R&D imports
Up to 200 units per year may be imported for R&D without BIS certification, provided they are not sold commercially. Year-wise records must be maintained.
Exemption 03
Existing stock
Declared stock held by a BIS-certified manufacturer (or one who has applied) may be sold for up to six months from the implementation date, subject to a declaration to BIS.
Bottom Line
Conclusion
Electric sieving machines are explicitly listed under QCO 2026. Motor dust-protection design is a key consideration for pre-testing validation. Importers and manufacturers must obtain BIS certification before the applicable implementation date.
Our Services
How Omega QMS Supports BIS Certification for Electric Sieving Machines
Omega QMS Pvt. Ltd. assists Indian manufacturers, foreign manufacturers, and importers in obtaining BIS certification for electric sieving machines under the Electrical Appliances QCO 2026.
Product-level QCO scope assessment for electric sieves and flour sifting machines Exemption eligibility assessment for R&D imports and export manufacturing BIS certification strategy and documentation for Indian and foreign manufacturers Coordination with BIS-recognised testing laboratories for IS 302 compliance Authorised Indian Representative (AIR) services for foreign manufacturers Customs documentation support for compliant import clearance
The QCO Is Notified — Uncertainty Has a Cost
The Electrical Appliances QCO introduces strict requirements for electric sieving machines. Companies that have not yet conducted a formal applicability assessment are operating with regulatory uncertainty that carries real commercial and legal risk.
Omega QMS Pvt. Ltd.
📞 +91-11-41413939 (100 Lines)
📍 909, Hemkunt House, Rajendra Place, New Delhi – 110008
Contact our regulatory team for a product-level applicability assessment and a clear view of your BIS certification requirements under the Electrical Appliances QCO.